C-band Pulsed Erbium-Doped Fiber Amplifier (EDFA)
Product Overview
The Fholink Pulsed Erbium-Doped Fiber Amplifier (EDFA) is a specialized product series designed for amplifying low-repetition-rate picosecond and nanosecond laser pulses. It delivers high-peak-power laser pulse outputs while minimizing nonlinear effects in the fiber, featuring high gain and low noise. It supports host computer software control and is available in benchtop or module-type packaging.
Product Features
1. Short Pulse Amplification
2. High Peak Power
3. Highly Customizable Parameters
Technical Parameters
| Parameter | Unit | Typical Value | Remarks |
| Wavelength Range | nm | 1530~1565 | |
| Pulse Width | ns | 0.1 ~ 50 | |
| Pulse Repetition Rate | kHz | 1 ~ 1000 | |
| Input Optical Pulse Peak Power | mW | 1 ~ 10 | |
| Output Optical Pulse Peak Power | W | 1 ~ 1000 | Dependent on pulse width and repetition rate |
| Noise Figure | dB | 5.5 | |
| Polarization-Dependent Gain | dB | 0.5 | |
| Polarization Mode Dispersion | ps | 0.5 | |
| Input / Output Port Isolation | dB | > 35 | |
| Pigtail Fiber Type | / | SMF-28 Fiber | |
| Connector Type | / | FC/APC | |
| Operating Mode | / | Automatic Current Control (ACC) | |
| Package Form | / | Optional Module Type / Benchtop |
Product Applications
1. Lidar (Light Detection and Ranging)
2. Optical Fiber Sensing
3. University and Scientific Research
4. Fiber Lasers
-
ꁇBackbone network
-
ꁇMan/private network
-
ꁇAccess network
-
ꁇCore network
-
ꁇSwitches
-
ꁇOptical Transceivers
-
ꁇNetwork
-
ꁇLaser and sensing
-
ꁇOptical Fiber Sensing
-
ꁇOptical Component
-
ꁇFiber Optic Patch Cord
-
ꁇOptical Amplifier
